All Spiral Pipe and Fittings 2020欧洲杯盘口

• 45 Degree Adjustable Angles
• 45 Degree Full Saddle
• 45 Degree Lateral Cross
• 45 Degree Lateral Cross with Reducer
• 45 Degree Standing Seam Angles
• 45 Degree Swedged Saddle
• 45 Degree Two-Piece Pressed Solid Welded Angles
• 45 Degree Welded Gored Angles
• 90 Degree Adjustable Elbows
• 90 Degree Conical Cross
• 90 Degree Conical Cross with Reducer
• 90 Degree Conical Swedge Saddle
• 90 Degree Conical Tee
• 90 Degree Conical Tee with Reducer
• 90 Degree Cross
• 90 Degree Cross with Reducer
• 90 Degree Full Saddle
• 90 Degree Pressed Saddle Tap
• 90 Degree Pressed Saddle Tap with Damper
• 90 Degree Shoe Tap Saddle
• 90 Degree Standing Seam Elbows
• 90 Degree Swedged Saddle
• 90 Degree Tee
• 90 Degree Tee with Reducer
• 90 Degree Two Piece Pressed Solid Welded Elbows
• 90 Degree Welded Gored Elbows
• Access Doors (Rectangular)
• Access Doors (Round)
• Bullnose Tee (Bullhead)
• Companion Angle Rings – Pressed and Rolled
• Complete Seal Damper Sleeve

• Complete Seal Damper Sleeve with 2-inch Standoff
• Complete Seal Fittings
• Concentric Reducer
• Conical E-Z Tap with 2-inch Standoff Collar
• Connector (Coupling)
• Double Rod Hanger
• E-Z Flange Jr. with Barrel Clamp – 6-inch to 24-inch Diameter
• E-Z Tap Collar with 2-inch Standoff
• E-Z Tap Collar with Damper
• E-Z Tap Collars
• E-Z Tap Collars with 2-inch Standoff
• E-Z Tap Conical Takeoff Collar
• E-Z Tap Conical Takeoff Collar with Damper
• Eccentric Reducer
• End Cap (Plug)
• Fixed Pattern Diffusers – 2 Cone Series
• Fixed Pattern Diffusers – 3 Cone Series
• Floor sweeps
• Full Blast Gate
• Heavy Duty Flexible Duct Ties
• Heavy Duty Volume Dampers
• High Efficiency Takeoffs
• High Efficiency with 2-inch Standoff
• KV12 Bracket Assembly
• Light Gauge Round Pipe Hangers
• Notched Collars
• Notched Collars with Damper
• Offset
• Pair of Pants (Wye Branch)
• Pressed Concentric Reducer
• R4.2 Insulated Flexible Duct
• Rectangular Duct Wrap
• Register Takeoffs
• Round Ceiling Diffuser with Butterfly Damper
• Round Dampers (Light Gauge)
• Round Ductcap
• Sheet Metal Screws (TEK Screws)
• Single Rod Hangers
• Skyblasts
• Sleeve with 2” Standoff
• Spin-In Collar with Dual Quad Damper
• Spiral Pipe
• Spiral Pipe Connector (Non-Gasketed)
• Square to Round
• Super Heto
• Super Heto with 2-inch Extension with E-Z Flange
• Super Heto with 2″ Standoff
• Super Heto with Damper
• Tensioning Tool
• Wire Rope Hangers CL18
• Wire Rope Hangers CL23